E-Glass Chopped Strand Mat Chopped Strand Mat is a non-woven reinforced material. It is manufactured by spreading continuous filament roving of 50mm in length, distributed it at random uniformly held together with powder or emulsion binder. . Depending on the different composition of fiber glass, chopped strand mat is divided into E-Glass Chopped Strand Mat and C-Glass Chopped Strand Mat .Depending on the different composition of binder, chopped strand mat is divided into powder chopped strand mat and emulsion chopped strand mat, which is used extensively for hand lay-up process, and secondly for the winding, molding, continuous system board and other technology. . It is suitable for unsaturated resins, phenol resins, epoxy resins and vinyl resins. . 【Product Characteristics】  Uniform thickness, softness and hardness good.   Good compatibility with resin, easy completely wet-out.  Fast and consistent wet-out speed in resins and good manufacturability.  Good mechanical properties, easy cutting.  Good cover mold, suitable for modeling complex shapes.  Excellent acid corrosion. . 【Technical Specification】 Product Code Unit Weight (g/m2 ) Roll Weight (kg) Binder Content(%) Moisture (%) EMC 100-900 30-50 2-8 ≤0.2 Requirements for the performance of the specific products, please refer to the product testing report. 【Packing 】 Each Chopped Stand Mat is packed onto a paper tube with an inside diameter of 76mm. The roll is wrapped up with plastic film, and then packed into a carton. The rolls can be loaded into a container directly or on pallets. �【Storage】 Unless otherwise specified, Chopped Strand Mat should be placed in a dry, cool damp-proof place. It should always be remained in the original packaging before and after use. The best storage temperature is between15 ℃ to 35 ℃, relative humidity of 35% -65% 【Order information】 Ordering please specify ① the product code, ② weight, ③ width, ④ order quantity, ⑤ packaging, ⑥ special requirements . Technical Specification E-Glass Chopped Srand Mat 【Unit Area of Quality Deviation】 Type Nominal Unit Area of Quality (g/m2) Allowable Deviation (%) Average Deviation (%) CSM ≤300 ±20 ±10 CSM 300～ 599 ±18 ±10 CSM ≥600 ±15 ±8 【Combustible Content】 Type Area Weight (g/m2) Powder Loi (%) standard < /DIV> Emulsion Loi(%) standard < /DIV> Special CSM 100 7.6- 18 6.8- 10.2 Special CSM 120 6.8- 15 6.0- 9.2 Special CSM 150 5.6- 12 5.5- 8.5 Ordinary CSM 225 3.5- 6.8 5.0- 7.6 Ordinary CSM 250 3.2- 6.2 4.8- 7.4 Ordinary CSM 280 3.2- 6.0 4.0- 6.5 Ordinary CSM 300 2.8- 5.2 3.5- 6.0 Ordinary CSM 375 2.8- 5.0 3.2- 5.4 Ordinary CSM 400 2.5- 4.8 2.5- 4.6 Ordinary CSM 450 2.5- 4.2 2.4- 4.0 Ordinary CSM 600 2.2- 3.8 2.2- 3.8 Ordinary CSM 900 2.0- 3.5 2.0- 3.5 【Breaking Strength N/150mm】 Area Weight (g/m2) Breaking Strength,≥(N) TD MD ≤150 ＞150 ≤300 ＞300 ≤600 ＞ 600 50 50 100 100 120 120 150 150 【Styrene Solubility】 Type Styrene Solubility. 23℃(second) H ＜ 40 M 40～ 105 L ＞ 150 【Moisture Content】 Chopped Strand Mat, powder binder≤0.1%, Chopped Strand Mat, emulsion binder≤0.2%。 【Edge and Width】 Chopped Strand Mat edge is decided by customer, which can be cut edge or feather edge.The width is also decided by customer, allowable deviation could be ±3mm.

Asia Composite Materials (Thailand) Co.,Ltd.
ADDRESS:7/347 moo 6 Mabyangporn,Pluakdaeng, Rayong 21140 Thailand（Head office）
7/29 Moo 4 ,  Phananikhom,  Nikhomphatthana , Rayong，Thailand 21140（Branch00001)
TEL: +66 038027400 FAX: +66 038027402   E-mail: fiberglass@wbo-acm.com